TRAY & POWER CABLES

TRAY CABLEXHHW-2 or RW90/ServiceCPE®, Shielded600/1,000 Volt Copper

Resources

Description

Class B stranded copper conductors, insulated with heat and moisture resistant, chemically crosslinked polyethylene (type XHHW-2 or RW90), phase identified and cabled together with fillers (when necessary). Cable core is covered with binder tape, longitudinally applied corrugated copper tape shield, and an overall black CPE jacket. Available with tinned conductors.

Application

Suitable for use in hazardous locations: Class I - Div 2, Class II - Div 2.

Standards

UL1277
CSA C22.2 #230/#239 TC/CIC
ICEA S-95-658/NEMA WC-70
Exposed Runs Rated (TC-ER)*
IMSA 19-1 (K-1 Colors)
Flame Rated: IEEE 383 (70,000 BTU), IEEE 1202/CSA FT-4,
UL 1581, Two-hour Firewall
Temperature Rated at 90°C Wet/Dry, Cold Temperature Rated at -25°C
Sunlight Resistant, Gasoline and Oil Resistant I Jacket
Direct Burial
Color Code: K-2 Solid Colors (optional color codes available)
RoHS Compliant

Request QuoteDownload Spec Sheet

VIEW PRODUCT DATA TABLE
Part Number	Number of Conductors	Overall Jacket ^(mils)	Nominal Diameter ^(in.)	Approx. Net Weight ^(lb./1000')	Ampacity ^{(30°C ambient) 90°C Wet/Dry}
TCCPESHC14/2	2	45	0.45	107	25†
TCCPESHC14/3	3	45	0.47	127	25†
TCCPESHC14/4	4	45	0.50	151	20†
TCCPESHC14/5	5	60	0.57	191	20†
TCCPESHC14/7	7	60	0.61	235	17†
TCCPESHC14/9	9	60	0.69	287	17†
TCCPESHC14/12	12	60	0.76	352	12
TCCPESHC14/19	19	80	0.91	538	12

TCCPESHC12/2	2	45	0.48	128	30†
TCCPESHC12/3	3	45	0.51	160	30†
TCCPESHC12/4	4	60	0.58	209	24†
TCCPESHC12/5	5	60	0.62	244	24†
TCCPESHC12/7	7	60	0.67	306	21†
TCCPESHC12/9	9	60	0.76	377	21†
TCCPESHC12/12	12	80	0.88	505	15
TCCPESHC12/19	19	80	1.01	724	15

TCCPESHC10/2	2	60	0.56	176	40†
TCCPESHC10/3	3	60	0.59	222	40†
TCCPESHC10/4	4	60	0.63	270	32†
TCCPESHC10/5	5	60	0.68	318	32†
TCCPESHC10/7	7	60	0.73	409	28†
TCCPESHC10/9	9	80	0.88	540	28†
TCCPESHC10/12	12	80	0.98	685	20
TCCPESHC10/19	19	80	1.12	994	20
*Per the NEC, when specified with a separate ground or when one conductor is specified as the cable ground. †The overcurrent protection for items marked with an (†) shall not exceed 15 amps for #14 AWG, 20 amps for #12 AWG, and 30 amps for #10 AWG per NEC 310-16 footnote. NOTE: The data shown is approximate and subject to standard industry tolerances.